How It Works

 

Make the Stand

1. Remove backing tape and stick the pads to card.

2. Tuck corners of pads into slits on the card.

3. Fold panels and insert hook into slot to farm a triangle.

4. Sit stand on its side, with the pads facing the room. Ideally this is placed above shoulder height with good airflow.

Hang the Card

1. Apply pads as above and hang the card directly from the hook with the pads facing outwards.

 Stick the Pads

1. Depending on the application you can just remove the backing tape and use both pads or cut the pad in half into two pocket pads.

2. Remove sticky tape and apply to hard surface, such as rubbish bin lid or surface where the sticky tape will not damage the surface (not on the likes of painted gib/doors directly).

 

Place one stand in a small affected area, and two stands in a larger affected area.

AirMop is more effective if placed where there is airflow and placed above chest height over the source of the odour, with pads facing out and exposed to the air. Be sure you remove the main source of the odour as much as you can before using AirMop.

For information on an antimicrobial test, please view this PDF HERE.

 

 

 Smelly Spill Sand

1. Shake container before use.

2. Pour contents liberally over the fluid.

3. Leave for a minimum of 20-30 minutes allowing the Spill Sand to absorb the fluid.

4. When fluid is absorbed, scoop or brush Spill Sand and dispose of waste. Any residue can be vacuumed. On carpeted surface you may need a second vacuum when completely dry for residual granules.

5. Reapply if required.